Length: 1/2"

Outside Diameter: .528"

Inside Diameter: .370"

Note that all of our iron heads come with ferrules included at no charge. This is in case you need more.

Length: 1/2"

Outside Diameter: .528"

Inside Diameter: .370"

Note that all of our iron heads come with ferrules included at no charge. This is in case you need more.  

Length: 3/4"

Outside Diameter: .528"

Inside Diameter: .370"

Note that all of our iron heads come with ferrules included at no charge. This is in case you need more.

Length: 3/4"

Outside Diameter: .528"

Inside Diameter: .370"

Note that all of our iron heads come with ferrules included at no charge. This is in case you need more.

Length: 3/4"

Outside Diameter: .480"

Inside Diameter: .335"

Note that all of our wood heads come with ferrules included at no charge. This is in case you need more.

The epoxies we sell are absolutely the best you can buy, and we won't stock anything cheaper.  And rest assured, our epoxy is always fresh.

This price is for two 4 oz bottles (Parts A and B).

We use the same exact formula that is the choice of club makers for the past 25 years. Used by most major club manufacturers for shafting, setting soleplates and weighting. Bonds to wood, metal, steel or graphite. Two-component, room temperature cure with excellent cohesive strength, pull-out strength and torque resistance. This material is so strong that it is also used for bonding sledge hammer heads to metal, wood or fiberglass handles.
Cure Time: 24 hours.
Mix Ratio: 1:1 by volume.
Break Down Temp: 250 degrees.
Lap Shear Strength: 3,330 psi.
Mixed Color: Black

Black epoxy is fairly new to the golf industry, and we don't know why it wasnt here sooner! Perfect for fixing "ferrule mistakes" - it blends right in! Once you use black epoxy, you will never go back, and that is a fact!

Need to build some clubs right away and hit them the same day? This is the Epoxy for you! 25 minute set time, 24 hour for a total cure. The clubs are hittable in a couple of hours.

Mixed Viscosity: 70,000 cps.
Lap Shear Strength: 3,000 psi.
Mixed/Cure Color: Black
Set Time: 25 minutes
Cure Time: 24 hours
Mix Ratio: 1:1 by volume.

Packaged: 1.5 oz. (50 ml.) cartridge

The epoxies we sell are absolutely the best you can buy, and we won't stock anything cheaper. And rest assured, our epoxy is always fresh.

This price is for two 16 oz bottles (Parts A and B).

Elementis EPOWELD 3243A/B High-Impact Shafting Epoxy
The choice of club makers for the past 25 years. Used by most major club manufacturers for shafting, setting soleplates and weighting. Bonds to wood, metal, steel or graphite. Two-component, room temperature cure with excellent cohesive strength, pull-out strength and torque resistance. This material is so strong that it is also used for bonding sledge hammer heads to metal, wood or fiberglass handles.
Cure Time: 24 hours.
Mix Ratio: 1:1 by volume.
Mixed Viscosity: 15,000 cps.
Lap Shear Strength: 3,330 psi.
Mixed Color: Black

Works with most solvents. Easy to use, fast set-up. Pay more at Golfsmith or Dynacraft.

Works with most solvents. Easy to use, fast set-up. Pay more at Golfsmith or Dynacraft.

EPOWELD 3243 Ivory: The golf industry standard for over 40 years. Used by most major club manufacturers. Exhibits high-impact & pull-out strength, excellent torque resistance and adhesion. Strong, safe and reliable. Cures to an ivory color in 24 hours.

One packet does about 6 clubs.

Lead tape for adjusting swingweight

1/2" wide, 100" long

• Light Weight Design.
• 8 Way full length dividers.
• Easy access insulated drink pouch.
• Rain hood included.
• Putter well.
• Multiple pockets.
• Flasy design that demands attention!

• 7 Way divider with protective putter well.
• Izzo dual strap system.
• 5 Storage Pockets.
• Rain Hood and Umbrella holder.
• 7 pounds, a nice sturdy bag!